Tour à métaux Takamaz XW 50

This TAKAMAZ XW 50 Lathe was manufactured in the year 2006 in Japan. It is equipped with a FANUC Series 32i-A Control unit. It has 2x hydraulic tanks and a coolant tank litted. The machine dispose of 2x 6-station turrets. See technical specs PDF (EN) attached below.
application type: Turning
Location: Italy
machine type: Lathe
availability: Immediately
GINDUMAC ID: IT-TUR-TAK-2006-00001
Measurements width: 2030 MM
Measurements depth: 1685 MM
Measurements height: 2200 MM
Spindle speed range: 4500 1/MIN
Spindle motor power: AC 5.5/3.7 kW
Number of axis: 2
X-AXIS Rapid traverse: 18 m/min
Z-AXIS Rapid traverse: 18 m/min
Number of turrets: 2
Number of tool slots: 6
Optimum turning diameter φ30 × 50- Max. Swing over bed φ220mm- Max. Turning diameter φ150mm- Max. Turning length 100mm- Spindle nose jis // spindle bearing id mmφ65 // hole through spindle mm φ37- Max. Tool size mm20 sq
φ25- Max. Stroke on axis mm x: 100
z: 150- Feed motor kw x: ac1. 0
z: ac1. 6- Hydraulic tank lit. 12 (× 2)- Coolant tank lit. 154