Cric TyreON TPH60T-1 Air hydraulic jack 60 Tons neuf

Capacity 60T airhydraulic jack
1-stage jack 60T
Lifting height 42 - 105,1 cm
Model Long chassis - Long bar
Weight - Total length 126 kg - 219 cm
Application Intensive commercial use
Delivery includes Extensions 20 - 100 - 200 mm
Hydraulic oil is filled



Long chassis - Long bar
This unique pneumatic high lift jack with a minimum height of 42 cm plus a lifting height of 105.1 cm is widely used in construction, earthmoving and the agricultural sector.
TyreON TPH60T-1 pneumatic high lift jack 60 ton
Pneumatic high lift jack 1 piston rated for 60T.
This 1-stage 60T jack requires compressed air to lift heavy loads up to 60 Tonne.
Our jacks are standard equipped with many extras and safety options such as a joystick with dead man's control that also controls a steady delayed drop.
Pneumatic high lift jack 60 ton - features
The durable heavy duty axle jack is designed and made for intensive professional use.
With internal and external hard-chrome cylinders resistant to wear and corrosion, and each cylinder is fitted with two seals to prevent any oil loss.
The axle jack turns off and stops promptly when the hold-to-run joystick is released.
Comes with a shortcut for quick (de)coupling and an overpressure valve to prevent damage due to overload.
A non-return valve guarantees a locked position for loads at all heights and a controlled even and smooth high lift rate under load. The reduction valve ensures a smooth shock free descent, also with the heaviest load.
The TyreON TPH60T-1 is fitted with a system that allows the lifting cylinders to be raised to the jacking point quickly and then also to be dropped rapidly once without load.
The chassis, made of thick sheet steel, offers the best protection of the internal parts.
The oil cannot escape, even if the jack is positioned on its side.
TyreON pneumatic high lift jacks will not fail in extremely low or high temperatures.
The jack was tested at -25 °C to + 45 °C and dynamic and static off-centre load tests were conducted to ensure safety.
CE approved, meets all current requirements;
EN 12100:2010 Safety of Machinery + EN 1494:2000+A1:2008 Mobile or Move-able Jacks.
The techniques and possibilities of the TyreON TPH60T-1 pneumatic high lift jack
Warranty - TyreCARE - Final test
Each pneumatic high lift jack is fully tested before being packed along with its documentation.
The servicejacks are delivered with a one-year warranty.
TyreCARE means that even after the warranty period, we assist you with technical support and information.
Various models in stock
TPH60T-1 Air hydraulic jack 60 Tons