Raboteuse à quatre côtés SCM Superset NTE

This SCM Superset NTE was manufactured in 2008. A robust used profile milling machine featuring a touchscreen operation, 6 spindles including a UNIWELLE, and a spindle speed of 8300 rpm. It offers a working width up to 240 mm and includes a quick-change spindle system with Powerlock HSK 85. Ideal for detailed woodworking with its comprehensive tooling and motor-driven feed rollers. Contact us for more information about this machine.
Configuration: 6 spindles + 1 universal spindle (UNIWELLE) = 7 shafts; suitable for profiling/cutting
Control: MOBILE 10 touchscreen
Interface/Tooling system: HSK 85S Powerlock; T-SET spindle quick-change; quick-clamping devices
Working range:Working width (finished): 15–240 mmWorking height (finished): up to 125 mmMinimum workpiece length: 450 mm
Working width (finished): 15–240 mm
Working height (finished): up to 125 mm
Minimum workpiece length: 450 mm
Spindles:Speed: 6,000 / 8,300 rpmDiameter: 40 mmMounting length: vertical 220 mm, horizontal 250 mmAxial adjustment: vertical 75 mm, horizontal 45 mmFlight circle diameter: dressers 120–140 mm; profile spindles 100–200 mmProfiling depth of 2nd lower shaft with Ø200 mm tool: 15 mm
Speed: 6,000 / 8,300 rpm
Diameter: 40 mm
Mounting length: vertical 220 mm, horizontal 250 mm
Axial adjustment: vertical 75 mm, horizontal 45 mm
Flight circle diameter: dressers 120–140 mm; profile spindles 100–200 mm
Profiling depth of 2nd lower shaft with Ø200 mm tool: 15 mm
Motors:Feed motor: 4 kW (inverter-controlled)Dressing/planing spindle: 7.5 kWRight vertical spindle: 7.5 kW (Powerlock HSK 85)Left vertical spindle: 7.5 kW (Powerlock HSK 85)Upper horizontal spindle 1: 7.5 kW (quick clamping)Upper horizontal spindle 2: 7.5 kW (Powerlock HSK 85)Lower horizontal spindle: 7.5 kW (Powerlock HSK 85)Universal spindle: 7.5 kW (quick clamping)
Feed motor: 4 kW (inverter-controlled)
Dressing/planing spindle: 7.5 kW
Right vertical spindle: 7.5 kW (Powerlock HSK 85)
Left vertical spindle: 7.5 kW (Powerlock HSK 85)
Upper horizontal spindle 1: 7.5 kW (quick clamping)
Upper horizontal spindle 2: 7.5 kW (Powerlock HSK 85)
Lower horizontal spindle: 7.5 kW (Powerlock HSK 85)
Universal spindle: 7.5 kW (quick clamping)
Feed system:Feed speed: 6–36 m/min (via inverter)Feed rollers: Ø140 mm; 2 rollers 140 x 25 per feed shaftMotor-driven feed roller in work table and outfeed tableTwo feed units after upper spindles to reduce center distance from 620 to 450 mm
Feed speed: 6–36 m/min (via inverter)
Feed rollers: Ø140 mm; 2 rollers 140 x 25 per feed shaft
Motor-driven feed roller in work table and outfeed table
Two feed units after upper spindles to reduce center distance from 620 to 450 mm
Tables and guides:Feed table length: 2,500 mmAdjustment range for feed table and infeed guide: 10 mm
Feed table length: 2,500 mm
Adjustment range for feed table and infeed guide: 10 mm
Pressures, guides, and safety:Horizontal pressure before the planer with on/off switchHorizontal pressure device before the planing shaft, switchable from control panelPneumatic pressure shoes in front of upper horizontal spindlesPressure shoes at the front of the horizontal spindle guardHardened insert in work table before the planerLighting inside protective cover
Horizontal pressure before the planer with on/off switch
Horizontal pressure device before the planing shaft, switchable from control panel
Pneumatic pressure shoes in front of upper horizontal spindles
Pressure shoes at the front of the horizontal spindle guard
Hardened insert in work table before the planer
Lighting inside protective cover
Lubrication:Forced lubrication (basic equipment)Manual central lubricationManual pump for work table lubrication
Forced lubrication (basic equipment)
Manual central lubrication
Manual pump for work table lubrication
Positioning/adjustment:Electronic horizontal positioningElectronic tool diameter setup/adjustment
Electronic horizontal positioning
Electronic tool diameter setup/adjustment
Extraction:Required extraction capacity: min. 10,443 m³/h
Required extraction capacity: min. 10,443 m³/h
Other:On/off switch for feed unit before the planer
On/off switch for feed unit before the planer
Additional equipment
Extraction hose included
Powerlock mounting bracket included
Tooling included for HSK spindles; 240 mm cutterheads installed on horizontal spindlesNote: Not all tools shown are included
Note: Not all tools shown are included
Documentation: spare parts catalog (8 complete PDF catalogs)
application type: Milling (Wood)
Location: Germany
machine type: Wood Mill
Table Length: 2500 mm