Bulldozer Caterpillar D6K2 LGP

ENGINE - Blow by: Minimal to none
ENGINE - Air cleaners: Good
ENGINE - Any smoke: Minimal to none
ENGINE - Oil or fuel leaks: none visible
ENGINE - General running condition: Runs well
TRANSMISSION - Gear change: HST changes well
TRANSMISSION - Steering: Responsive
TRANSMISSION - Oil leaks: None visible
TRANSMISSION - is the transmission noisy?: No
TRANSMISSION - Controls: Good, responsive controls
TRANSMISSION - General running condition: Moves and steers well
UNDERCARRIAGE - Shoe height: 45mm, 80%
UNDERCARRIAGE - Shoes - any wear in trailing edge: Minimal
UNDERCARRIAGE - Rail height: 103mm, 50%
UNDERCARRIAGE - Average diameter of pins and bushings: 55mm, 50%
UNDERCARRIAGE - Sprockets: 87mm gape, 9mm tips, 45%
UNDERCARRIAGE - Left side front idler: 30%
UNDERCARRIAGE - Right side front idler: 30%
TOP ROLLERS - Left side 1st roller: 155mm & 154mm, 50%
TOP ROLLERS - Left side 2nd roller: 156mm & 154mm, 50%
TOP ROLLERS - Right side 1st roller: 153mm & 155mm, 50%
TOP ROLLERS - Right side 2nd roller: 155mm & 156mm, 50%
BOTTOM ROLLERS - Roller 1: Visual only, 50%
BOTTOM ROLLERS - Roller 2: 170mm & 169mm, 50%
BOTTOM ROLLERS - Roller 3: 167mm & 167mm, 50%
BOTTOM ROLLERS - Roller 4: Visual only, 50%
BOTTOM ROLLERS - Roller 5: 168mm & 168mm, 50%
BOTTOM ROLLERS - Roller 6: 167mm & 168mm, 50%
BOTTOM ROLLERS - Roller 7: 170mm & 168mm, 50%
BOTTOM ROLLERS - Roller 8: Visual only, 50%
CAB - Cab mounts any wear: Minimal
CAB - Any wiring for laser system: Yes
CAB - Back up alarm: Loud and clear
CAB - Battery isolator switch: Manual fitted
CAB - Lights: All working
CAB - Wipers: All working
CAB - Heater: Good heat
CAB - A/C: Nice and cold
CAB - Seat condition: Good condition
CAB - Cladding condition: Good condition
CAB - Floor mat condition: no wear or tears
CAB - Seat belt: Working, undamaged
CAB - Mirrors: Rear view only, undamaged
CAB - Horn: Loud and clear
CAB - Cab glass condition: Minor scuffs
CAB - Cab glass - any cracks: No
CAB - Steps and grab handles secure: All fitted and undamaged
BLADE - Blade type: PAT
BLADE - Blade width: 3615mm
BLADE - Blade height: 1270mm
BLADE - Main lift rams wear: L/H: 3mm, 2mm. R/H: 2mm, 2mm
BLADE - Pitch rams wear: L/H: 1-2mm, 5mm. R/H: 2mm, 4mm
BLADE - Link ram wear: L/H: 3mm, R/H: 3mm
BLADE - Tilt ram wear: L/H: 3-4mm, R/H: 2-3mm
BLADE - Ball joint wear: 5-7mm
BLADE - C frame wear: L/H: 5mm, R/H: 4mm
BLADE - Equaliser bar wear: L/H: 3-4mm, R/H: 3mm, Mid: 3mm
BLADE - Face / Moldboard: Good shape, good thickness
BLADE - Spill rack condition: Few minor dents
BLADE - General blade condition: Good
PAINT & DECALS - Paint condition: Fair, slightly faded
PAINT & DECALS - Any rust patches: Minimal
PAINT & DECALS - Condition of decals: To be replaced
Rear View Camera
Hydrostatic Drive
PAT Blade
76 cm Single Grouser Track Shoes
Drawbar