Moteur MAN D2676LE423 (i6-800) marine engine pour MAN
Hörschingà 8335 km de vous
Si vous décidez d'acheter un véhicule ou du matériel à bas prix, assurez-vous que vous communiquez avec un vendeur réel. Cherchez autant d'informations sur le propriétaire que possible. Un escroc peut se faire passer pour une société réelle. En cas de doute, contactez-nous en utilisant le formulaire de commentaires afin que nous effectuions un contrôle supplémentaire.
Avant d'effectuer un achat, étudiez attentivement plusieurs offres de vente afin de connaître le coût moyen du modèle de véhicule ou d'équipement que vous avez choisi. Si le prix de l'offre qui vous intéresse est très inférieur aux offres similaires, réfléchissez bien. Une différence de prix considérable peut indiquer la présence de défauts cachés ou une tentative d'escroquerie.
N'achetez pas de produits dont le prix est trop différent du prix moyen de produits similaires.
Ne consentez pas à payer une caution ou une avance douteuse. En cas de doute, n’hésitez pas à demander des précisions, des photos et des documents supplémentaires, vérifier l'authenticité des documents ou encore poser des questions.
C'est l'arnaque la plus répandue. Des vendeurs malhonnêtes peuvent demander une avance sur le montant total pour « réserver » votre achat. De cette manière, ils peuvent recueillir un montant considérable, puis disparaître.
- Faire un prépaiement sur la carte
- N'effectuez pas de prépaiement sans établir de documents confirmant le transfert d'argent si le vendeur vous semble suspect au cours de vos échanges.
- Transfert de l'argent sur le compte séquestre
- Méfiez-vous de ce genre de demandes, il est très probable que vous soyez en train de communiquer avec un fraudeur.
- Virement sur le compte d'une société avec un nom similaire
- Soyez vigilant(e), des fraudeurs peuvent se faire passer pour des entreprises connues en introduisant des modifications mineures dans le nom. Ne transférez pas d'argent en cas de doute sur le nom de l'entreprise.
- Substitution de ses propres coordonnées dans la facture d'une entreprise réelle
- Avant d'effectuer le virement, vérifiez que les coordonnées indiquées sont exactes et qu'elles appartiennent à l'entreprise indiquée.
Coordonnées du vendeur
+358 50 53...
Montrer
+358 50 5345498
+358 9 231...
Montrer
+358 9 23165797
Autriche 
Autriche, Hörsching
Autriche, Hörsching
Autriche, Hörsching
Autriche, Hörsching
Autriche, Hörsching
Italie, Calenzano (FI)
Autriche, Hörsching
Belgique, TEMPLOUX
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215